Thermoelectric Nano-Matrix laser beauty devices
Thermoelectric cooling technology has a wide range of applications in the field of beauty and medical.Such as Nano-Matrix laser beauty device.
It is a working mode on the laser, the diameter of the laser beam is less than 500μm, and it is not a regular ground arrangement into a lattice state. Therefore, dot matrix laser is the use of segmental treatment concept, in part of the skin to create thousands of invisible wounds, through extrusion, regeneration, the epidermal old tissue removal, while stimulating collagen remodeling phenomenon, to promote the effect of skin regeneration. The light spot of each laser is only 1/6 of the diameter of the hair, which can effectively improve skin problems such as acne marks, pores, fine lines, and roughness.
The use of thermoelectric cooling , it does not need to use any refrigerant, can continue to work, without pollution sources, without any rotating parts, will not produce the effect of rotation, work, there is no noise and too much vibration sound. In addition to cooling, thermoelectric cooling module , peltier module, TEC modules can also be heated, which can be achieved from +50° C to 0° C for medical care device cooling and heating.
Beijing Huimao Cooling Equipment Co.,Ltd. designed new type of thermoelectric module, thermoelectric cooling device,TE module ,which meet special medical care equipments requirement.
Thermoelectric cooling module TES1-031025T125 specification
Hot side temperature is : 27 C,
Umax: 3.6V,
Imax: 2.5A,
Qmax: 5.4W.
ACR: 1.2 Ohm.
Size: 10X10X2.5mm
Thermoelectric module named TES1-04903T200 Specification
Hot side temperature is 25 C,
Imax： 3A，
Umax:5.8 V
Qmax： 10 W
Delta T max：> 64 C
ACR：1.60 Ohm
Size： 12x12x2.37mm
All of our thermoelectric modules , peltier elements,TEC modules , thermoelectric cooling units, thermoelectric devices are meet REACH , RoHs 2.0 requirement.
Post time: Feb-24-2025
